Replace the adhesive gasket ring on the lens end of the front-facing camera for an iPhone 5, 5S, 5C, SE, 6, 6 Plus, 6S, or 6S Plus. Set of 5 gaskets.

Replace the gold-colored conductive adhesive area on the flex cable of the lightning connector assembly for an iPhone 6 Plus.

Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 6 Plus. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 6 Plus. Set of 5 pads.

Use these custom adhesive strips to secure an iPhone 6 Plus, iPhone 6s Plus, or iPhone 7 Plus battery to the rear case.

Replace the mesh and plastic bezel that covers the earpiece speaker opening in the iPhone 6 and 6 Plus.

This metal bracket secures the home button assembly to the display assembly.

Replace the clear plastic frame for the proximity sensor on the back of the display assembly.

This plastic guide centers the front-facing camera over the camera lens opening in the front glass panel.

Sorting trays to track your screws on at a device specific level.

Replace the external lens cover for the rear-facing camera on an iPhone 6 Plus.

Replace the external lens cover for the rear-facing camera on an iPhone 6 Plus.

Replace the external lens cover for the rear-facing camera on an iPhone 6 Plus.

Protect your iPhone 6/6s Plus screen!

This gasket holds the home button onto the display assembly.

Replace the black adhesive cover that holds the home button link cable on the LCD Shield Plate.

This metal bracket secures the front panel assembly cables to the logic board.

This metal bracket secures the audio control cable and the power button cable to the logic board.

This antenna is responsible for picking up Wi-Fi signals.

This metal bracket secures the flash to the rear case.