Sorting trays to track your screws on at a device specific level.

Replacement 1624 mAh battery for iPhone SE. 3.82 Volts (V), 6.21 Watt
Hours (Wh). Does not require soldering. Compatible with all iPhone SE models.

Front panel glass/digitizer and LCD screen assembly for iPhone SE. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Front panel glass/digitizer and LCD screen assembly for iPhone SE. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

These custom adhesive strips will secure a battery to the rear case of an iPhone 5S, iPhone 5C or iPhone SE.

Keep your iPhone 5, 5s, 5c, or SE looking pristine.

Set of screws for the iPhone 5, 5C, 5S, or iPhone SE.

The lightning connector assembly includes the lightning connector, primary microphone, and headphone jack and is compatible with all iPhone SE models.

Replace the adhesive gasket ring on the lens end of the front-facing camera for an iPhone 5, 5S, 5C, SE, 6, 6 Plus, 6S, or 6S Plus. Set of 5 gaskets.

The lightning connector assembly includes the lightning connector, primary microphone, and headphone jack and is compatible with all iPhone SE models.

This speaker is for speakerphone and audio output.

This antenna is responsible for cellular signals.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This metal bracket secures the front panel assembly cables to the logic board.

This cable assembly includes the front camera, secondary microphone, ambient light and proximity sensors for the iPhone 5S or iPhone SE.

Replace the copper tape that connects the Front Facing Camera and Sensor Cable to the LCD Shield Plate.

This part fits between the LCD and the rest of the internal parts in the iphone 5S or iPhone SE.

Replace the speaker used when the phone is held to your ear.

This antenna is responsible for Bluetooth and Wi-Fi signals.

This metal bracket secures the home button assembly to the display assembly.

Replace the iPhone SE internal power/lock, volume, and the vibrate/ring switches along with the cable and the power contacts for the vibrator....

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch and is available in Space Gray, Silver,...

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch and is available in Space Gray, Silver,...

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch and is available in Space Gray, Silver,...

This part is the exterior Volume Button cover and is available in Space Gray, Silver, or Gold.

This part is the exterior Volume Button cover and is available in Space Gray, Silver, or Gold.

This part is the exterior Volume Button cover and is available in Space Gray, Silver, or Gold.

Replace the antenna cable on the edge of an iPhone SE logic board.

This test cable simplifies connecting multiple lightning connector assemblies for the iPhone SE.

Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 5S, 5C, or SE. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 5S, 5C, or SE. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 5S, 5C, or SE. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the audio control cable connector in an iPhone 5S, 5C, or SE. Set of 5 pads.

Replace the adhesive backed foam gasket on the front of the audio control cable connector in an iPhone 5S or SE. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the rear-facing camera cable connector in an iPhone 5S or SE. Set of 5 pads.

Replace the captive philips screw, spring contact, and adhesive backing from the home button assembly of an iPhone 5S or SE.

Replace the external lens cover for the rear-facing camera on an iPhone 5S or iPhone SE.

This test cable simplifies connecting and testing LCDs and digitizers for the iPhone 5S or iPhone SE.

Replace the rotational motor with counterweight vibrator for the iPhone 5, iPhone 5S, or iPhone SE.

This metal bracket secures the front facing camera and earpiece speaker to the display assembly.

Replace the 12 megapixel main camera for the iPhone SE.

Replace a scratched or malfunctioning home button for an iPhone SE and fix cosmetic problems or an unresponsive home button. This assembly includes...

Replace a scratched or malfunctioning home button for an iPhone SE and fix cosmetic problems or an unresponsive home button. This assembly includes...

Replace a scratched or malfunctioning home button for an iPhone SE and fix cosmetic problems or an unresponsive home button. This assembly includes...

Replace a scratched or malfunctioning home button for an iPhone SE and fix cosmetic problems or an unresponsive home button. This assembly includes...