Submit search
Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus.
Replace the black adhesive that secures the LCD IC and cable to the LCD shield plate. Set of 5.
Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 7 Plus. Set of 5 pads.
Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 7 Plus. Set of 5 pads.
Replace the adhesive backed elastic gasket for the loudspeaker opening of an iPhone 7 Plus. Set of 5 gaskets.
Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus.
Replace the adhesive backed foam spacer on the back of either of the rear-facing camera cable connectors in an iPhone 7 Plus. Set of 5 pads.
Replace the two gold-colored conductive adhesive areas on the flex cable of the lightning connector assembly for an iPhone 7 Plus.
Replace the adhesive backed foam pad between the rear-facing cameras and the rear case of an iPhone 7 Plus. Set of 5 gaskets.
Use these custom adhesive strips to secure an iPhone 6 Plus, iPhone 6s Plus, or iPhone 7 Plus battery to the rear case.
Replace the mesh that covers the earpiece speaker opening in the iPhone 7 Plus.
This custom cut adhesive film secures the earpiece speaker anti-dust mesh bracket to the front panel of an iPhone 7 Plus.
Replace a scratched or missing camera flash diffuser lens.
Replace the internal clips that hold the external button covers in place. Set of three.
Replace the mesh covers for the speaker, vent, and microphone openings in an iPhone 7 Plus. Mesh covers are part of the water and dust ingress protection for the phone.
Replace the gasket that seals the earpiece speaker mesh bracket assembly against the back of the earpiece speaker.
Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case.
These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.
Sorting trays to track your screws on at a device specific level.
This metal bracket secures the camera flash to the rear case.