Replace the adhesive gasket ring on the lens end of the front-facing camera for an iPhone 5, 5S, 5C, SE, 6, 6 Plus, 6S, or 6S Plus. Set of 5 gaskets.
Replace the adhesive backed foam spacer on the back of the front camera and sensor cable connector in an iPhone 5. Set of 5 pads.
Replace the small metal contact clip that fits over the plastic tab on the loudspeaker assembly of an iPhone 5.
Sorting trays to track your screws on at a device specific level.
This is the external button cover for the power/lock button. It does not include the internal electronic switch.
This is the external volume control button cover. It does not include the internal electronic switches.
Replace the external lens cover for the rear-facing camera on an iPhone 5.
This metal bracket secures the front facing camera and earpiece speaker to the display assembly.
This black elastic gasket fits over the microphone on the lightning connector assembly and fixes the microphone to the rear case.
Replace the external switch cover for the vibrate/ring switch. This part does not include the internal electronic switch.
Keep your iPhone 5, 5s, 5c, or SE looking pristine.
This metal bracket secures the home button assembly to the display assembly.
This is the external home button cover. It does not include the internal home button switch.
This metal bracket secures the front panel assembly cables to the logic board.
This metal bracket secures the battery connector to the logic board.
Replacement 1430 mAh battery for iPhone 4S. 3.7 Volts (V), 5.30 Watt Hours (Wh). Does not require soldering. Compatible with all iPhone 4S models.